Deluxe Spray Booth
Description
The air flow of spray booth is from the top to the bottom. It is convenient and offers better working environment. The balanced indoor temperature makes better painting effect. This China car painting booth can be used to paint bright products and products that need to add color like furniture and sheet metal.
Features
1. The spray booths are constructed from 18 gauges and it has prime-quality galvanized steel.
2. All panels of China car painting booth have tongue and groove interlock structures.
3. Double intake centrifugal fans
4. Industry-leading light levels
5. The China car painting booth has specific and dual voltage 36-watt light fixtures.
6. The full grilles basement of spray booth is made by flat bar and twisted steel.
7. Booths include installation instructions, fan, motor and drive, fasteners, hardware, and necessary sealant for assembly.
8. Control panel and other electric components of China car painting booth can be purchased separately.
9. The following spare parts of spray booth are optional: pressure gauge , pressure alarm system, Heat recovery system, PCL control system, Siemens motors, Siemens electric component, Rock wool panel, PU panel, Full grilles and LED lights.
Parameters
Item
|
Detailed Specification
|
Inside dimension
|
6900×3900×2650 mm (L×W×H)
|
Outside dimension
|
7000×5350×3400mm (L×W×H)
|
Front door
|
Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour.
|
Emergency door
|
1 units, 650×1800mm (W×H), colour: white.
|
Basement
|
Galvanized steel assemble, 300mm high, quadrate steel support, 2 rows grilles made by flat bar and twisted steel, galvanized, 3 rows indented plate, silver colour, 2 ramps, 750×2000mm/pc, silver colour.
|
Wall panel
|
Thickness: 50mm, :1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white.
|
Light
|
Ceiling Lights: 8Units×4Pcs=32Pcs×36W, side lights: 8Units×2Pcs=16Pcs×18W, with electronic ballasts, lighting boxes are powered coated, illumination ≥1000LUX
|
Generator cabinet
|
Intake from back upper, exhaust from rear upper, galvanized steel frame; orange machine-made panel covered, filled with heat preservation material inside.
|
Intake and Exhaust system
|
Inlet:1×7.5KW turbo fan, air capacity for each fan: 25000m3/h.
|
Outlet: 1×7.5KW turbo fan, air capacity for each fan: 25000m3/h. Manual damper, 4m ducts, 1 pcs 900 bend, 1 pcs 300 bend.
|
Heating system
|
Italy RIELLO G20 diesel burner, stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 200000kcal/h, max temperature: 80℃, 4pcs chimney, 1 pcs bend.
|
Purification system
|
Pre-filter, ceiling filter, fibreglass filter, activated carbon filter.
|
Roof
|
Galvanized steel
|
Control system
|
Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, all motors is normal start.
|
Total power
|
17.5KW (Power supply 1×220V, 3×380V, 50HZ)
|
Unit price
|
USD/set FOB Guangzhou
|
Related Products
-
- 4 Wheel Scissor Car Lift BY-270Our full rise scissor car lift is designed to maximize your available floor space and give you more room to move around transmission jacks, oil drains and other shop equipment. You can use our
-
- 4 Wheel Scissor Car Lift BY-350DThe execution part of four wheel alignment scissor car lift adopts stacked bar form and power-driven mechanical transmission structure. The China portable scissor car lift is widely used for the
-
- 4 Wheel Scissor Car Lift BY-280Wheel alignment scissor car lift is a heavy-duty design. It has low pressure control box with up, down and stop buttons. It is equipped with safety device under the platform which can make sure the
-
- 4 Wheel Scissor Car Lift BY-300BA, The hydraulic auto scissor car lift is applicable to lifting, detecting, repair and maintenance of various cars and small vehicles.
B, Flush-mount design of China car lift takes fewer places.
C,