Spray Booth With Water-Borne Paint System
Description
This water base spray booth
is equipped with water soluble device,
and it is mainly used for water soluble paint painting. It can speed up the air
flow in spray booth through water soluble wind mouth, which can dry up the
painting quickly.
The air flow of this spray booth with
water-borne system is from the top to the bottom. It is convenient and offers
good working environment for workers. The balanced indoor temperature can make
painting effects better.
Features
1. The water-borne paint system of water
base spray booth on both sides of ceiling speed up drying after painting
2. 0.476mm
color steel with polyurethane inside for wall panel
3. double-intake centrifugal fans are belt
drive type.
4. Riello RG5S diesel burner with a heating
productivity of 260000Kcal/h
5. Pneumatic damper for spraying baking
cycle.
6. All panels of water base spray booth are
tongue and groove interlock structures.
7. Industry-leading light
levels
8. Spray booth has specific and dual
voltage 58-watt light fixtures.
9. Spray booth with water-borne system include
installation instructions, fan, motor & drive, fasteners, hardware, and
sealant necessary for assembly
10. Control panel and other electric
components of water base spray booth can be purchased separately.
11. The following spare parts are optional:
Recovery system, Siemens motor, Siemens electric component, rock wool panel, PLC
control and LED lights.
Working
process of Spray Booth with Water-Borne System
During painting, outside fresh air comes
into the heating generators through pre-filter system, enters into the plenum,
filtered by ceiling filter and enters into the booth. This process can bring
clean, symmetrical and steady-going down airflow for spraying.
After painting, hot air goes form heating
generators to plenum, enters room after filtered by ceiling filter and provides
heat that is necessary for baking of car’s surface. In the meantime, its
water-borne paint system starts working. The high speed air flow comes out from
nozzles and speeds up drying. Afterwards, the air with little benzene will be
released to the atmosphere after being filtered twice by the exhaust air filter.
Parameters
of Water Base Spray Booth
Item |
Detailed Specification |
Inside dimension |
6900×3900×2650 mm (L×W×H) |
Outside dimension |
7000×5600×3500mm (L×W×H) |
Front door |
Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour. |
Emergency door |
1 units, 800×2000mm (W×H), colour: white. |
Basement |
Galvanized steel assemble, 300mm high, quadrate steel support, adjustable type, full grilles made by flat bar and twisted steel, galvanized, 3 ramps, 900×2000mm/pc, silver colour. |
Wall panel |
Thickness: 50mm, :1150mm, tongue and groove structure, 0.476mm colour steel with PU inside, colour: white. |
Light |
Ceiling Lights: 8Units×4Pcs=32Pcs×58W, side lights: 8Units×4Pcs=32Pcs×36W, with electronic ballasts, three primary colours Phillip tube, lighting boxes are powered coated, illumination ≥1500LUX |
Generator cabinet |
Intake from side upper, exhaust from rear upper, aluminum alloy steel frame; orange machine-made panel covered, filled with heat preservation material inside. |
Intake and Exhaust system |
Inlet: 2×4KW centrifugal fan, belt drive, model: TAE-400H, total air capacity: 25000m3/h, air speed ≥0.24m/s. |
Outlet: 1×7.5KW centrifugal fan, belt drive, model: TAE-560H, total air capacity: 24000m3/h. Manual damper, 4m ducts, 1 pcs 900 bend, 1 pcs 300 bend. |
Heating system |
Italy RIELLO RG5S diesel burner, double layer stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 260000kcal/h, max temperature: 80℃. |
Purification system |
Pre-filter, ceiling filter, fibreglass filter, cylinder activated carbon filter. |
Water base paint system |
Water base paint system on the roof, stainless steel nozzle, 3×0.75KW motor, air capacity: 4800 m3/h. |
Roof |
50mm PU panel. |
Control system |
Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, pressure gauge, power supply switch, water base paint switch, emergency stop, all motors is normal start. |
Total power |
22KW (Power supply 1×220V, 3×380V, 50HZ) |
Unit price |
USD/set FOB Guangzhou |
Related Products
-
- 4 Wheel Scissor Car Lift BY-300BA, The hydraulic auto scissor car lift is applicable to lifting, detecting, repair and maintenance of various cars and small vehicles.
B, Flush-mount design of China car lift takes fewer places.
C,
-
- 4 Wheel Scissor Car Lift BY-280Wheel alignment scissor car lift is a heavy-duty design. It has low pressure control box with up, down and stop buttons. It is equipped with safety device under the platform which can make sure the
-
- 4 Wheel Scissor Car Lift BY-270Our full rise scissor car lift is designed to maximize your available floor space and give you more room to move around transmission jacks, oil drains and other shop equipment. You can use our
-
- 4 Wheel Scissor Car Lift BY-350AThe hydraulic scissor car lift adopts half electric and half mechanical wheel structure. It is widely used for the maintenance of large vehicles. This truck-mounted scissor lift has moderate speed